Models:
|
Name
|
Description
|
Model Number
|
|
|
Multi programmer
|
2nd Generation Multiple Programmer
|
PRG-MUL2
|
Notes: (1) Output current range with constant power at 30W
(2) Certified input voltage range: UL, FCC 100-277Vac; otherwise 100-240Vac.
(3) Measured at 100% load and 220Vac input (see below "General Specifications" for details).
(4) SELV output.
(5) Class 2 & SELV output.
(6) x = G are UL Recognized, ENEC and CCC, etc. models; x = T are UL Class P models; x = B are BIS models; x
= F are UL Class P models with flying leads. See drawings for cable information.
Fetaures:
Supports DALI interface driver Programming
Supports 0-10V Programmable Driver Programming
Supports Other Controllers (TDD-ANPNx, SDD-AAPNx)
Off-line programming capability
Auto programming Mode
Selectable tools for mass programming
Function Descriptions:
Off-line Programming
At PC end, the upper software can download the configuration to the programmer, then only 5V power supply is needed to program the drivers or controllers.
Automatic Programming
When this function is enabled, after connecting the programming leads to the programmer, it will download the configuration to the controller or driver. Long Push Button(5s<T<10s), the Automatic function will be disabled or enabled.
When the function has been turned on, the Red LED will flicker 2 times, each time lasts 0.5 second.
When the function has been turned off, the Green LED will flicker 2 times, each time lasts 0.5 second.
Buzzer
The programmer provides a port for connecting to an external Buzzer if needed.
When programming has finished successfully, the buzzer will beep for 0.5 seconds.
Long Push Button(T>10s), it will enable or disable the buzzer function.
When the buzzer function is enabled by above action, the buzzer will beep 2 second, or it will beep 0.5s that means the function is disabled.
Product Series Matching Verify
Before starting the programming, the programmer will read the driver model information. If the configuration model does not match the driver model, the upper software will show fail message, and the red LED will turn on.
The matching function is selectable at PC end. The default setting is "on".
Notes:
1. 0~xV controller does not support matching function for it only supports one direction protocol.
2. Green LED indicates successful programming. Red LED indicates failed programming.
Product Pictures:
Contact Us For Detailed Technical Sheet And More Professional Support:
Carmen Chan
Sales Manager
Hangzhou Felicidad Technology Co., Ltd.
Add: Room 11199, 260 Jiangshu Road, Xixing Street, Binjiang District, Hangzhou City, Hangzhou, Zhejiang, China
Tel: +86 17605889790
Ralated Products:
|
EUM-050SxxxDG 50W Series
|
EUM-075SxxxDG 75W Series
|
EUM-100SxxxDG 100W Series
|
|
EUM-150SxxxDG 150W Series
|
EUM-200SxxxDG 200W Series
|
EUM-240SxxxDG 240W Series
|
Audited Supplier 
){kind=link}